Fluid handling, regulation and control

Fluid handling, regulation and control

Fluid handling, regulation and control

MCU-CH – Centrifugal single stage pumps ISO 2858/DIN 24256

Description

The Travaini monostage centrifugal pumps of the MCU-CH series are principally for chemical and petrochemical applications and used on almost all the plants. The new design and the wide sizing of the bearing housings allows high reliability and minimum maintenance while the special design of hydraulic profiles for the impeller and the casing allows to reach high efficiencies and low NPSH in any application.

The Travaini monostage centrifugal pumps of the MCU-CH series are standardized according to ISO 2858/DIN 24256 standards and the manufacturing program includes three bearing frame sizes of the “Back pull-out” type; the pump casing is of the spiral type with axial suction flange; the impeller is of the radial type with overhang mounting. The whole Travaini production is guaranteed by certified quality system according to ISO 9001 standards.


TECHNICAL SPECIFICATIONS

  • Impeller: Closed
  • Max flow m³/h: 1200
  • Max pressure bar:  6
  • Pumped fluids: Clean or slightly muddy liquids
  • Self-priming: No
  • Stages nr.: 1
  • Seal: Mechanical or packing gland
  • ISO: 2858
  • Handling clean or slightly contaminated liquids, hot, superheated, acidic and caustic in chemical industry, petrochemical, pharmaceutical, food, pulp and paper, environmental, steel, textile, etc.
  • Capacity up to 1200 m3 /h and heads to 6 bar.
  • Materials of construction are numerous, from cast iron to hastelloys.
  • High hydraulic efficiencies and low NPSH requirements.
  • Shaft sealing by packed stuffing box, single or double mechanical seals (ISO 3069/UNI EN 12756) with every installation option per API requirements.
  • Pump casing and seal housing can be provided with heating or cooling chambers, as needed.

STANDARD MATERIALS OF CONSTRUCTION

  • Pump casing: Cast iron – AISI 316 stainless steel – ASTM CF8M – Hastelloy C – ASTM-CN7M
  • Casing Cover: Cast Iron – Stainless Steel AISI 316 – ASTM CF8M – Hastelloy C – ASTM-CN7M
  • Shaft: Stainless Steel AISI 420 – Stainless Steel AISI 316 – ASTM CF8M – Hastelloy C – Incoloy 825
  • Impeller: Cast Iron – AISI 316 stainless steel – ASTM CF8M – Hastelloy C – ASTM-CN7M
  • Bearing housing: Cast iron
  • Wear ring: Cast iron – AISI 316 stainless steel – ASTM CF8M – Hastelloy C – ASTM-CN7M
  • Shaft sleeve: AISI 316 stainless steel – ASTM CF8M – Hastelloy C – Incoloy 825
 Chiama  :
Scrivici :
×